Digital pressure gauge 3_Refrigerant meter_Zhejiang Shuang'an Instrument Technology Co.,

Specification

Standard version

Robust, precise digital indicator
The robust stainless steel case and the battery power enable a flexible operation in various applications and industries. For a precise and quick on-site reading of a pressure value, a digital indicator is the ideal solution. The bar graph display and drag pointer function integrated into the display, as well as retrievable Min/Max peak values, enable effective analysis of the measuring point.

Customised installation
Through its rotatable case, the model DG-10-E can be easily adapted to local conditions. The backlighting also provides easy readability of the display in poor lighting conditions. Additional programming functions are: Automatic power-off, tare function and password protection. There is unit switching between the units bar, psi and MPa already integrated into the standard model DG-10-S.

Proven sensor technology
For decades, sensors manufactured by Double-An have guaranteed high accuray, long-term stability and repeatability in industrial pressure measurement.

Gauge pressure

bar	Measuring range	0 ... 5	0 ... 10	0 ... 20	0 ... 50	0 ... 100	0 ... 160	0 ... 250	0 ... 400	0 ... 600
	Overpressure limit	10	20	40	100	200	320	500	800	1,200
	Burst pressure	12	25	50	120	800	1,000	1,200	1,700	2,400
psi	Measuring range	0 ... 145	0 ... 300	0 ... 600	0 ... 1,450	0 ... 2,000	0 ... 3,000	0 ... 5,000	0 ... 7,500	0 ... 10,000 ¹⁾
	Overpressure limit	290	580	1,450	2,900	4,640	7,250	11,600	17,400	21,750
	Burst pressure	360	725	1,740	11,600	14,500	17,400	24,650	34,800	43,500

1)DG-10-5 can only display up to 9999 psi

Vacuum and +/- measuring ranges

bar	Measuring range	-1 ... +5	-1 ... +10	psi	Measuring range	-30 inHg ... +72 psi	-30 inHg ... +145 psi
	Overpressure limit	10	20		Overpressure limit	145	290
	Burst pressure	12	25		Burst pressure	170	360

Digital indicator

	Model DG-10-S	Model DG-10-E
Type of indication	7-segment LCD	7-segment LCD、14-segment LCD (option)
Digits	4-digit	4-digit
Character size	11 mm	11mm and 7mm
Indication range	-1999 ... 9999	-1999 ... 19999
Update	200 ms	200 ms
Backlighting	no	yes (see "Hardware functions")
Bar graph with drag pointer function	yes	yes
Rotatability	no	300° (see "Hardware functions")

Model DG-10-S
Model DG-10-E

Ordering information: Model / Measuring range / Process connection

Software functions

Function	Model DG-10-S	Model DG-10-E
Min/Max memory	yes	yes
Automatic power-off	no	15, 30, 60, 120 minutes
Tare function	no	yes
Unit switching	bar, psi, MPa	bar, psi, MPa
Password protection	no	yes
Reset to factory settings	no	yes

Hardware functions

Rotatability of the display
The display of the model DG-10-E can be rotated through 300°, thus it can be read from almost any position. Therefore the model DG-10-E can also be used in situations where mounting is difficult.
Backlighting
The model DG-10-E features backlighting so that the display can be easily read, even under poor lighting conditions.

Accessories

Rubber protection cap (black)
Minimess connector: Mazimum pressure strength 630 bar
Sealing for process connection

Voltage supply

The voltage supply is provided via two 1.5 V AA cells.
The operating time is approx. 4,000 hours, when using batteries with a capacity of 2,000 mAh.

Reference conditions

Temperature: 0 ... 60 ℃(32 ... 140°F)
Atmospheric pressure: 860 ... 1,060 mbar (12.5 ... 15.4 psi)
Humidity: ＜90 % r.h.(non-condensing)
Nominal position: Calibrated in vertical mounting position with process connection facing downwards.
Power supply: 2x1.5V AA cell

Accuracy

Accuracy at reference conditions: ≤ ±0.5% of span ±1 digit¹⁾
1)Restriction for vacuum and +/- measuring ranges in the range of -1 ... 0 bar ≤ ±1.0% of span ±1 digit
Including non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error per IEC 61298-2).

Calibration accuracy of zero signal: ≤ ±0.1% of span (power-up reset)
Adjustability of zero point: ≤ ±20% of span (via tare function with model DG-10-E)
Temperature error at 0 ... 60℃
Mean temperature coefficient of zero point ≤ ±0.15% of span/10K
Mean temperature coefficient of span ≤ ±0.15% of span/10K
Long-term stability: ≤ ±0.2% of span/year

Operating conditions

Ingress protection (per IEC 60529): IP65

Temperatures
Medium：-30 ... +100℃ (-22 ... 212°F)
Ambient：-10 ... +60℃ (14 ... 140°F)
Storage：-20 ... +70℃ (-4 ... 158°F)

Materials

Wetted parts
Process connection: Stainless steel 316Ti
Sealing material: See "Process connections"
Sensor element: PH grade steel

Non-wetted parts
Case：Stainless steel 304
Front foil and membrane：Polyester

szylb1.9.jpg

Process connection
Model 112.28: Cu-alloy
Model 132.28: Stainless steel 316L
Lower mount (LM) or centre back mount (CBM), G 3/8 B (male), 19 mm flats

Pressure element
Model 112.28: Cu-alloy
Model 132.28: Stainless steel 316L

Movement: Cu-alloy, wear parts argentan
Dial: Aluminium, white, black lettering
Pointer: Aluminium, black
Case: Stainless steel
Window: Polycarbonate
Bezel ring: Crimp ring, glossy finish stainless steel

Options
Other process connection
Sealings (model 910.17, see data sheet AC 09.08)
Liquid filling (glycerine, permissible temperature):
Ambient: -20 ... +60℃
Medium: +60℃ maximum (model 113.28), +100℃ maximum (model 133.28)
Panel frame 88 x 88 mm, stainless steel, black
Restrictor in the process connection